Drywall Installers Dallas tX

You may be tempted to try fixing your drywall yourself but considering how many satisfied clients DFW Superior Drywall Pros has, it would be best to at least give your humble and qualified drywall contractor a call first.

We provide drywall installation service like no other drywall contractors near Dallas, TX area. While most contractors jump at the first opportunity to recommend a full replacement, we explore every repair option before going the installation route.

You don't have to take our word for it, give us a call and find out just how much we love to provide superior service while saving you money in the process. That is the only way we know how to do business!

(214 974-3662)

Get Your Free Quote!

What Types Of Drywall Are Available?

The drywall industry is an important part of the construction industry as it provides an inexpensive way to finish a room.

While it may depend on which drywall contractor you hire and what service they offer within their company, you can be aware of four main types of the drywall as a consumer. Drywall contractors work with the homeowner or building owner to pick the most appropriate option for the job.

Knowing about the different types and what each type offers (as well as how much extra the type may cost) can help you get the most out of your drywall installation job.

Here are four of the most common types of drywall available:

Regular Drywall

This is the basic grey drywall you probably have in mind when you think of what drywall looks like. It’s the cheapest option and it can be used in a wide variety of situations including most areas of your home or office building. It’s a good all-around option, especially if you’re on a tight budget and still need a good contractor to help you with your project.

Green Drywall

Green drywall is environmentally friendly and sustainable.

It is made out of recycled paper and uses less water in the manufacturing process. It also contains no formaldehyde or other toxic chemicals.

It can be used in any application, including commercial, residential, and renovation jobs.

It is also mold-resistant and can be used in areas where high moisture will be an issue. If you want to install drywall in areas like your bathroom or laundry room where it is likely to see a lot of moisture, go with green drywall. It costs about 20% more than regular drywall, but because it resists mold better, the investment could be worth it.

Purple Drywall

Purple drywall is a type of drywall that contains a chemical called ammonium sulfate. The chemical is used as an additive to gypsum plasterboard to control odor and reduce efflorescence. If you need something that is mold, mildew, and moisture resistant purple drywall is a good option. Not only does it resist mold and mildew but it’s also more durable than other options.

Type X

Drywall type X is a type of drywall that is used for soundproofing and fire protection. This type consists of fiberglass, mineral wool, and gypsum. Yes, all types of drywall by design are fire-resistant but Type X drywall is in a class of its own when it comes to soundproofing and controlling fire. There are many types of drywall on the market, but not all are created equal. Drywall type X is one example of this. It is typically more expensive than other types on the market. The average cost is about $5 per sheet. Type X drywall, on the other hand, costs about $5.50 per sheet on average.

We are your premier drywall contractors in Dallas TX. Call us today at (214) 974-3662 for your free estimate on your drywall installation project!

Call us for your FREE Quote!

214-974-3662

Installing drywall in attic in Dallas, TX

Why hire a drywall contractor for drywall installation?

Drywall installation is a skill that requires years of experience to master. It is also the most expensive part of the construction process. That is why it’s important to hire a drywall contractor for this type of drywall project.

The top drywall contractors are professionals who have mastered this skill and can get your project done quickly and efficiently. Besides they also do other jobs like taping, texturing, and finishing the drywall.

If your damages are caused by an unknown factor, it may be a good idea to seek the help of a professional. Give us a call today for a Free quote!

How much does drywall cost?

Drywall is the most common type of wall material used in residential construction. The price varies depending on the size and quality of the product as well as installation costs.

The average price of drywall can range from $1 per square foot to $3 per square foot. This estimate does not include any additional installation costs such as screws, nails, or other hardware needed for installation. If you have drywall on the floor of 12' x 12', you will have costs averaging around $4760 to $720. This could be slightly higher if you choose insulation or customization.

On average, drywall is made of 8x4 inch gypsum panels. Their cost ranges between $10-$20.

Is installing drywall expensive?

In short, no - at least relatively speaking. Costs for installing drywall range from about $1-$3 per square foot. It costs around $50-60 for a mounting unit.

What Is The Cost Of Drywall Installation In The Dallas Area?

The cost of drywall installation in the Dallas area can vary depending on the size and complexity of the job. Let's take a quick look at how much it costs to install drywall in Dallas.

Installation in Dallas can range from $1,200 to $2,000 for a small room or hallway up to $5,000 or more for larger rooms with intricate details such as crown molding or arched ceilings. Most homeowners pay about $2 per square foot for this type of job and prices do not include any additional trim work that may be needed around doorways or windows.

Mounting plasterboard to wall in Dallas building

Call Us Today for your free quote on your drywall installation project!

214-974-3662

Drywall service made easy

Overall Installation process

The drywall installation process is a complicated task that requires a lot of time and effort. As part of our service, we first want to collect all the information and the project details about the building or home project. This helps us determine the best route to complete the job in a timely and efficient manner.

The process starts with the selection of the right type of drywall. There are two types available: gypsum board and fiberboard. Gypsum board is more popular because it is cheaper, more durable, and easier to work with.

The next step in the drywall installation project is to prepare the surface where you want to install the drywall panels. We ensure that the surface is flat, clean, and free from any debris or any other obstruction which might damage your panels or make them difficult to put in. The surface needs to be level and the ceiling should be plumb.

Now we lay the first layer.

After that, we need to apply a thin coat of joint compound to each joint. You also need a tape measure, carpenter’s pencil, straight edge or T-square, and screws.

The next step in the process is to attach the backer boards. We need to use drywall screws that are long enough so that they protrude out of the joint.

Next, we make sure that we have aligned each wall with a stud and then screw it in place. After completing this step, you can put trim or other accessories like molding or baseboards.

Learn more about our company

Advantages of using drywall

A drywall is a type of wall that is made with gypsum plaster and reinforced with paper or fiberglass. It is used to build interior walls, ceilings, and fire-resistant partitions in industrial buildings.

Construction material is essential for protecting property from rust and corrosion. Drywall and plaster are often the preferred options when going through a renovation because they offer more benefits.

The advantages of drywall are:

It has excellent soundproofing properties.
It can be installed quickly.
It can be easily repaired or replaced.
It is inexpensive.
It is easy to cut and shape.
It can be installed in areas where nails are not allowed, such as ceilings.
It can be installed horizontally or vertically.
It is easy to clean.
It can be painted.

The disadvantages are:

It is not as attractive as plaster and other materials, especially in newly renovated homes.
If it is not installed properly, it can lead to air leaks.

Let's dive deeper into some of the advantages!

It is recyclable

Drywall that is leftover from a job can be used for other purposes. For example, you could use it to create special walls or dividers in your building by using it as filler instead of transport materials. You can turn old drywall into the old if you remove the entire paper as it impacts fire safety. It can also be reclaimed and converted to soil used in agricultural practices, mines, forests, and mushroom nurseries.

It is energy-efficient

Drywall can be an energy-efficient building material because it reduces the amount of heat transfer through the walls. This can help in reducing the need for air conditioning in homes.

Who doesn’t want a lower electricity bill? In the first few months, you might not see significant savings, but over time your savings will be fully realized.

It is inexpensive

Drywall is relatively inexpensive to install. The per-unit project cost can range from $10 to $70 depending on costs in the region and the size of the project. Drywall cost is determined by the size of the project and how much labor is involved. It can be purchased in sheet form or in pre-fabricated panels. The more labor involved in installing drywall, the higher the cost for each square foot. But the point still stands, relatively speaking it is a much cheaper alternative than other materials.

It can be moisture and mold resistant

Drywall provides a textured surface that can anchor mold and fungi, reducing water infiltration over time. Layers of paint or wallpaper can also act as a barrier.

Drywall benefits - Mold and Moisture resistant

It features smooth surfaces

Drywalls are one of the most versatile building materials and help to make your workplace more enjoyable. Aside from their attractive looks, they are also easy to repaint if they get damaged and can be used in any type of situation.

It is easy to repair

Drywall is easy to repair because it does not require any special tools or skills. All you need is a basic understanding of how to use a few basic tools like hammers, saws, and screwdrivers.

Drywall is used by most homeowners because it can easily fix the damage and is durable. It's also relatively cheaper than other walls with similar qualities.

Drywall benefits - Easy to remodel and renovate

It is faster to remodel/build using drywall

Drywall has many advantages over other building materials such as plaster and concrete block. The first advantage is that it is lightweight. This means that the material can be easily transported from one place to another when needed. It also makes the installation process much easier because there are no heavy pieces of material that need to be carried up a ladder or into an attic. Another advantage is that it does not require any special tools for construction and installation like some other materials do such as cement blocks or plasterboard sheets which require heavy-duty tools for cutting and installation. It also requires very little finishing and can be left in its natural, unpainted state like a concrete block. By not painting it, the drywall does not need a primer or a finish coat and is also easier to clean since it cannot become dirty from paint build-up.

It can be soundproofed

The question here is not ‘Can it be soundproofed?’ but rather ‘How much noise do you want to block out?’. There is no beating soundproofing walls, especially if you have a noisy neighbor. With drywall, it’s completely possible to have luxuriant surroundings without compromising functionality.