Drywall Taping & Finishing in Fort Worth, TX
We tape, mud, and finish drywall (sheetrock, if that's the word you grew up with) for homeowners and businesses across Fort Worth, from Ridglea and Fairmount to the Stockyards and Near Southside.
Good drywall finishing disappears once the paint goes on: no visible seams, no flashing under a coat of eggshell, no nail pops showing up six months later. We finish drywall we've hung ourselves and drywall another contractor installed, on new construction, remodels, and drywall repairs alike.
Every job gets a written quote before we open a bucket of mud.
Get Your Free Quote!
Why Choose Us for Drywall Taping & Finishing in Fort Worth
Drywall Specialists, Not a General Handyman Crew
Taping and finishing is a trade, not a side task. Our Fort Worth drywall crews run a taping knife and mud pan daily, which is what it takes to leave a wall flat enough to hold up under raking light from a window or a can light.
We carry the liability insurance and Fort Worth contractor registration listed on our Insurance & Bonding page, and we're happy to provide proof before any project starts.
Level 4 and Level 5 Finishes on Request
Standard drywall gets a Level 4 finish: taped, coated, and sanded to a smooth finish for flat or eggshell paint. If you're painting a semi-gloss accent wall, installing a feature light, or building out a commercial drywall space with harsh side lighting, we skim-coat the whole surface for a Level 5 finish that hides seams even under glare.
Written Quotes, No Surprises
Contact Us Today! We are your exclusive residential drywall contractors in Fort Worth, Texas!
Our Taping and Finishing Process
Drywall tape goes on first, embedded in a bedding coat of joint compound, never dry against bare board. Skipping that step is one of the most common mistakes we see on DIY and rushed jobs, and it's why tape lifts or bubbles later. From there:
1
Bedding coat
2
Fill coat
3
Finish coat
4
Sand and inspect
Rushing the drying time between coats is the other mistake that causes trouble down the road: compound that's still wet underneath will crack once it fully cures. We let each coat dry on its own schedule rather than the calendar's.
Give Us A Call Today For Your Free Estimate! We are your exclusive commercial drywall contractors near Fort Worth, TX!
Understanding Drywall & Sheetrock Finish Levels
Not every wall needs the same amount of work, and paying for a Level 5 finish on a garage or storage room is money you don't need to spend.
- Level 3 covers seams and screws with two coats, skips the final skim, and works well under heavy texturing.
- Level 4 is the standard for most homes: three coats, sanded smooth, ready for flat or eggshell paint.
- Level 5 adds a full skim coat over the entire surface, which is what you want under gloss paint, strong lighting, or a large open wall where every imperfection would show.
We'll recommend the level that fits your paint sheen and lighting rather than defaulting to the most expensive option.
What Affects Your Taping and Finishing Cost
A few things move the price up or down on any given job:
- Total square footage of wall and ceiling
- Whether you're finishing new drywall installation or handling drywall repairs first
- Finish level (Level 3, 4, or 5)
- Ceiling height and access, since vaulted ceilings and stairwells take longer
- Whether we're texturing or matching an existing texture on the surrounding walls
We don't quote drywall work over the phone by the square foot, because the condition of what's behind the board matters as much as the square footage itself. Call (817) 383-0427 and we'll set up a time to walk the space and give you a firm number.
Serving Fort Worth Neighborhoods
We take taping and finishing jobs across Fort Worth, including TCU/West 7th, Westover Hills, Arlington Heights, Ridglea, Near Southside, Fairmount, Sundance Square, the Stockyards, Tanglewood, and Mistletoe Heights. See our full Fort Worth service area for the complete list of neighborhoods and surrounding cities we cover.
Frequently Asked Questions
Tape goes down first, embedded into a wet bedding coat of joint compound. Taping over dry board without that bedding coat is a common shortcut that leads to tape lifting or bubbling once the wall dries.
It depends on square footage, finish level, and whether we're handling drywall repairs before finishing. We give every project a written quote after walking the space, since two rooms of the same size can take very different amounts of work.
The two biggest are taping without a bedding coat and applying a new coat before the last one is fully dry. Both show up later as lifting tape or cracked compound, usually months after the paint is on.
Both. Small patch jobs, like a doorknob hole or a cracked seam, still get a proper bedding coat and taping so the repair blends into the surrounding drywall instead of showing through paint.
Get Your Free Quote!
Fort Worth, TX 76102
